Page 1 of 1

XW-SMA1

PostPosted: Sat Nov 30, 2013 10:11 am
by pingu57
Is there any way to get serviio to work with Pioneer XW-SMA1, XW-SMA3 ?

Re: XW-SMA1

PostPosted: Sat Nov 30, 2013 4:54 pm
by Illico
pingu57 wrote:Is there any way to get serviio to work with Pioneer XW-SMA1, XW-SMA3 ?

If these devices are DLNA compliant, please could you provide format supported by these devices ? (see signature links)
Do you see them on serviio console device list ?

Re: XW-SMA1

PostPosted: Sun Dec 01, 2013 12:00 pm
by pingu57
Illico wrote:
pingu57 wrote:Is there any way to get serviio to work with Pioneer XW-SMA1, XW-SMA3 ?

If these devices are DLNA compliant, please could you provide format supported by these devices ? (see signature links)
Do you see them on serviio console device list ?



This is what I get from Sink (it shows up):

  Code:
http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM,
http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM,
http-get:*:audio/mpeg:DLNA.ORG_PN=MP3,
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMABASE,
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMAFULL,
http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO,
http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO,
http-wavetunes:*:audio/x-ms-wma:*,
http-get:*:audio/wav:*,
http-get:*:audio/x-wav:*,
http-get:*:audio/flac:*,
http-get:*:audio/x-flac:*,
http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO_320,
http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO_320,
http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320


Yes they also show on serviio console device list.